Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image
Product Image

Square And Rectangular Tube Mill Machine

This is a direct square forming type square and rectangular tube mill production line. From the uncoiler to the palletizing and binding machine, the whole line is fully automatic.

Inquire
Product Introduction
Video
Technical Parameters

Product Introduction

The square and rectangular welded tube mill machine adopts the combined mold, multi-point pre-bending and direct square forming process. It has the characteristics of no dismantling of the main shaft, no dismantling of the arch, rapid roll change and low load of the unit. Compared with the non-combined mold, it reduces the die roll cost and roll change time by 60%. The four corners of the produced square rectangular tube have uniform thickness and high strength.

New Victor high frequency welded pipe mill machine can produce round, square, rectangular, oval and special shaped tubes. suitable for MS pipe, GI pipe, black pipe, high strength steel pipe, etc

By changing the roller, a single device can produce pipes of many sizes, Benefit from the roller quick change system, It only takes 20 minutes to replace the rolls and resume production.

Video

Technical Parameters

Model Pipe Size

(mm)

Pipe Thickness

(mm)

Pipe Material Speed

(m/min)

Power

(KW)

160*160*6 60*60*2 – 160*160*6 2 – 6 бb≤580MPa  бs≤350MPa 6 – 25 250
200*200*8 80*80*3 – 200*200*8 3 – 8 бb≤580MPa  бs≤350MPa 6 – 20 400
250*250*10 80*80*3 – 250*250*10 3 – 10 бb≤580MPa  бs≤350MPa 6 – 15 500
300*300*12.5 100*100*4 – 300*300*12.5 4 – 12.5 бb≤580MPa  бs≤350MPa 6 – 15 650
400*400*16 150*150*6 – 400*400*16 6 – 16 бb≤580MPa  бs≤350MPa 6 – 15 900